AMPS Industrial Controls

Lovato Electric Products

	The series of LOVATO ELECTRIC contactors includes three and four-pole versions, with AC, DC and DC low consumption coil (only for BG and BF type). The contactors, 110A AC3 and higher, have a coil which operates indifferently in AC or DC with very reduced consumption. Many accessories are available for the entire range.

Types - Three-poles - Four-poles - Four-pole versions with 2NO+2NC or 4NC main poles - For power factor correction - Control relays.	Selling points - Three-pole contactors up to 630A for AC3 duty - Four-pole contactors up to 1600A for AC1 duty - Special four-pole contactors with 2NO+2NC or 4NC main poles - Contactors for power factor correction up to 60kvar at 400VAC - Versions with AC, DC and DC low consumption control - Extensive choice of add-on blocks and accessories - Certified by primary international authorities.

MOTOR PROTECTION CIRCUIT BREAKERS
	The SM series is a new generation of motor protection circuit breakers with thermal and magnetic trip releases. An extensive range of settings (0.1 to 100A) and four class sizes allow the control and protection of motors up to 45kW (400V).

Types - Motor protection circuit breakers SM1: from 0.1A to 32A (Icu 400V 50kA) - Motor protection circuit breakers SM2-SM3: from 28A to 100A(Icu 400V 50kA).	Selling point - Wide adjustment range 0.1 to 100A - Breaking capacity Icu 50kA (400V) up to 100A - Suitable for isolation - Comprehensive line of accessories - Front mount contacts - Automatic trip indicators - High reliability and accuracy of tripping.

SWITCH DISCONNECTORS
	LOVATO Electric switch disconnectors can disconnect load currents and warrant the isolation of low tension circuits. The constructive characteristics, among which double contact breaking action, allow their utilisation in critical categories, such as AC21, AC22, AC23 or AC3 duty. The compact dimensions offers extremely flexible installation and extensive assembly configurations for absolutely safe operation.

Types - Versions: three pole, four pole and with fuse holder - Versions for photovoltaic applications - Changeover switches, 16A to 1250A - Types in plastic enclosure for switch disconnectors up to 125A	Selling points - 16 to 125A ratings - Version: door interlock, direct operating handle, door mounting and in enclosure - Add-on fourth pole - Snap-on auxiliary contacts, earth pole and neutral terminals - Modular and compact size.

MOTOR PROTECTION RELAYS
	Thermal overload relays for motor protection have adjustment ranges between 0.09 and 420A. They may be mounted directly on the contactors or independently.

Types - Phase failure sensitive with manual reset - Phase failure sensitive with automatic reset - Non phase failure sensitive with manual reset - Non phase failure sensitive with automatic reset - Thermistor protection relays.	Selling points - Thermal overload relays for currents between 0.09 and 420A - Thermal overload relays for motors with long starting time - Phase failure sensitive and non phase failure sensitive versions - Automatic or manual resetting - Independent or direct mounting on contactors - Thermistor protection relay.

ELECTROMECHANICAL STARTERS
	The electromechanical starters in enclosure are designed for mounting contactors and overload relays on low-rated machinery and in any type of application where there is no specific place for electrical equipment. Adapter plates and quick connect wiring are available to assemble compact direct-on-line, reversing or star-delta starters.

Types - Direct-on-line starters complete with thermal overload relay in insulated enclosure - Direct-on-line starters without or to be completed with thermal overload relay in insulated encosure - Reversing contactor assemblies - Changeover contactor assemblies - Star-delta starters, open frame - Star-delta starters, in enclosure - Star-delta starters with electronic TM ST time relays, open frame on 35mm top-hat rail.

CONTROL AND SIGNALLING UNITS
		The LOVATO Electric includes an extensive range of actuators, signal towers and signal beacons made of either a metal or plastic structure and to suit divers requirements. Mounting is quick and functional with no need of special tools.

PUSH-BUTTONS AND SELECTORS METAL AND PLASTIC SERIES - Flush and extended push-buttons - Push-push button actuators - Mushroom-head push-buttons - Double and triple-touch buttons - Mechanical reset buttons - Selector actuators - Illuminated buttons actuators - Illuminated push-push actuators - Illuminated mushroom-head actuators - Illuminated selector actuators - Double-touch button actuator with indicator - Pilot lights heads - Potentiometer drives - Joysticks. - Control station.		Push-buttons and selectors selling points - Metal and plastic series - Quick and easy installation - Standard front IP65 degree of protection - Highly conductive contacts (12V-5mA, capacity <20mOhm) - Contact operation: double breaking action, direct opening operation and self cleaning.
SIGNAL TOWERS Ø70mm - Steady or blinking light modules - Flash modules - Pulsed or continuousound modules - Incandescent and LED bulbs - Fixing bases and extensions.		Signal towers selling points - Metal and plastic fixing bases - Degree of protection IP65.
SIGNAL TOWERS Ø62mm - Steady or blinking light modules - Sound-light pulsed or continuous modules - Incandescent and LED bulbs - Fixing bases and extensions.		Signal towers selling points - Plastic fixing base. - Degree of protection IP54.

LEVEL CONTROL RELAYS
	LOVATO Electric experience in the water pumping field and continuous research have been applied in the design of relays for level monitoring of conductive liquids .

Types - Relays for conductive liquids - Electrodes and electrode holders - Rod probes - Priority change relays.	Selling points - Level monitoring of electrically conductive liquids - Modular and plug-in versions - Adjustable 2,5-200Ω sensitivity - Single and three-pole electrodes - Startup priority change relays.

SWITCHING POWER SUPPLIES
	Lovato Electric switching power supplies, intended for industrial, commercial and residential automation, transforms an input alternating (AC) voltage into an output direct (DC) one. Thanks to the switching technology, very high levels of efficiency, extremely compact-sized devices and reduced heat dissipation are obtained. The wide operating range of power supply voltages and the wide choice of output current allow to satisfy power supply requirements of the most common electromechanical and electronic elements, such as PLCs, timers, DC motors, displays, SSRs and other equipment normally found in automation systems.

Types - Modular version - DIN rail mount version.	Selling points - Single, two and three-phase types - Versions in industrial modular housing - Protection against short circuits, overloads and voltage peaks - High efficiency - Parallel connection using switch placed on model fronts (some only)

Contact us: 1.419.868.1920 or

Copyright © AMPS Industrial Controls. All rights reserved.